GPT-6.2 Astra and Sol are not two sizes of the same purchase. Astra is OpenAI's model for the hardest projects; Sol is its model for everyday work and high-volume agents. At standard short-context list rates, Astra costs four times as much per input and output token. The practical question is therefore not which model sounds stronger, but which one clears your acceptance bar at the lowest cost per task you can actually use — and when a better output is worth paying a premium for.
Scope and evidence. OpenAI published the GPT-6.2 Astra and Sol launch on November 17, 2026. Specifications and list prices below come from OpenAI's launch post and official model pages, checked November 18, 2026. This is a planning guide, not a benchmark report: we did not run either model, measure latency or score outputs. The cost example is arithmetic from official rates plus the assumptions stated with it. The ToAPIs international catalog lists Astra and Sol; use the live catalog for the variants, rates and routing available to your account. This article does not assert platform-specific rates, endpoint paths or regional coverage.
1. The official facts that anchor the decision
OpenAI's launch post positions Astra for complex professional work — slides, spreadsheets, documents, coding, computer use and visual reasoning — and Sol for everyday technical and non-technical tasks, including multistep agentic workflows. Both accept text and images and return text. The official model pages list the same context and output limits for each:
| Specification | GPT-6.2 Astra | GPT-6.2 Sol |
|---|---|---|
| API model ID | gpt-6.2-astra | gpt-6.2-sol |
| OpenAI positioning | Hardest projects, start to finish | Everyday work and agents at scale |
| Input modalities | Text, image | Text, image |
| Output | Text | Text |
| Context window | 1,050,000 tokens | 1,050,000 tokens |
| Maximum input | 922,000 tokens | 922,000 tokens |
| Maximum output | 128,000 tokens | 128,000 tokens |
| Knowledge cutoff | May 18, 2026 | June 1, 2026 |
| Reasoning setting | Highest; none is rejected | Highest; none is rejected |
| Fine-tuning | Not supported | Not supported |
The headline economic difference is price, not a different context limit:
| Official standard short-context rate | Astra | Sol | Astra / Sol |
|---|---|---|---|
| Input, per 1M tokens | $8.00 | $2.00 | 4x |
| Cached input, per 1M tokens | $0.40 | $0.10 | 4x |
| Output, per 1M tokens | $40.00 | $10.00 | 4x |
| 30-minute cache write, per 1M tokens | $10.00 | $2.50 | 4x |
Source: OpenAI API pricing page and model pages, checked November 18, 2026. Rates are USD per million tokens, before taxes and any platform charges. They are reference list prices, not a ToAPIs quote.
OpenAI also makes vendor-reported performance claims. It says Sol comes within 0.5 points of Astra on Cognition's FrontierCode 2.0 at about one-fifth the cost (both at maximum reasoning), and reports Astra at 1,318 Elo versus Sol at 1,259 on Artificial Analysis's AA-3D human-preference evaluation. These are vendor-reported results under configurations we did not audit. Use them as hypotheses; your prompts, tools and acceptance rules can produce a different ordering.
2. The 4x price gap: what has to be true for Astra
At standard short-context list rates, Astra and Sol have the same 4:1 relationship for input, output and cached input. If both models consume the same number of billable tokens and need the same number of attempts, Astra cannot have a lower cost per accepted task unless its acceptance rate is more than four times Sol's. Since acceptance is capped at 100%, that becomes impossible once Sol's acceptance rate exceeds 25%.
That statement has a narrow scope: same token volume, same attempts, same billed units. It is still a useful starting point because it shows how large the quality gap must be before Astra wins on cost alone. The break-even sensitivity looks like this:
| Sol acceptance rate | Astra acceptance needed to match Sol's cost per accepted task |
|---|---|
| 10% | 40% |
| 15% | 60% |
| 20% | 80% |
| 25% | 100% |
| 30% | 120% (not reachable) |
| 50% | 200% (not reachable) |
Assumes identical token counts and attempts per task, and that every attempt is billed. A different token profile changes the break-even point.
The break-even framing is not an argument that Astra is overpriced. It is an argument against treating a "best model" label as a routing policy. Astra can be rational when Sol's output is unusable, a wrong answer is expensive, or human repair costs more than the token premium. It is rarely the default for routine classification, extraction or short support replies.
Three qualifications matter:
- Token efficiency can move the ratio. If Astra reaches acceptance with materially fewer output tokens or attempts, its effective premium is below 4x. We have no matched measurements, so we do not claim a number.
- The ratio is not the bill. Above 272,000 input tokens, input and cache rates double and output costs 1.5x for the full request. The 4:1 list-rate relationship remains, but absolute costs rise; do not reuse short-context examples for long-context work.
- Other billed units can break the ratio. Tool calls, containers, file search, batch or Fast modes, Ultrafast, background windows, regional uplifts, taxes and platform fees are outside this arithmetic. Check the official pricing page and your account rate.
3. Scenario map: where each model earns its place
The decision becomes clearer when you name the workload, the failure cost and the volume. The table below is a starting policy, not a claim about measured quality.
| Workload | Start with | Escalate to Astra when | Main cost driver |
|---|---|---|---|
| High-volume support, classification, extraction | Sol | Ambiguous or high-value cases fail the rubric, or a wrong answer triggers a costly manual review | Attempts per task and acceptance rate |
| Scoped coding tasks, test generation, PR review | Sol | The change spans multiple files, requires design judgment, or a regression is expensive to detect later | Accepted-task cost plus review time |
| Slides, spreadsheets, memos, client deliverables | Sol for drafts | Template fidelity, factual synthesis and first-pass usability determine whether the deliverable is usable | Rework and review time |
| Long-horizon agents and tool workflows | Sol for execution | Planning or ambiguous steps repeatedly fail, or the agent needs stronger visual/computer-use judgment | Cumulative tokens and retries |
| Visual, 3D, CAD and interactive frontends | Sol for simple pages | Spatial precision, visual quality or detailed computer use drives the user outcome | Retries and human review |
| Offline batch processing | Sol | A quality filter rejects too many Sol outputs, or the task is inherently frontier-level | Batch discounts and rejection rate |
High-volume support and extraction: Sol is the economic default
A support triage or invoice-extraction pipeline may process thousands of short requests per day, with a few thousand input tokens and a short label or JSON output. Sol's $2/$10 rate is a large advantage, and its 1.05M context matches Astra's, so context capacity is not an upgrade reason. Escalate only specific failures: a schema failure on a high-value account, contradictory source documents, or an error that triggers refund or compliance review. Measure that cohort; do not move the whole queue because a demo looked better.
Repo-wide code changes: quality shows up as review time
For a one-line fix, Sol is the sensible first attempt. For a multi-file refactor with unclear design, the real cost includes senior-engineer reading, finding missed call sites and repairing tests. If Sol needs several rounds while Astra produces a mergeable change in one or two, Astra can be cheaper per accepted change despite the 4x token price. Acceptance must be execution: apply the patch and run tests in a disposable environment; a plausible diff is not enough.
Professional deliverables: Astra's premium is easier to justify
Slides, valuation workbooks, legal summaries and client memos have high rework costs. A deck that ignores the template or a memo that misses a required clause may consume more human time than the model fee. OpenAI positions Astra for professional conventions and template fidelity. Still, run a blind review with the real template: if Sol's draft is usable, pay Sol; if it needs restructuring, compare review time with Astra's premium.
Agents and visual workflows: split the planner from the executor
Agent workflows accumulate context, so the price gap compounds. A common pattern is Sol for routine tool calls, extraction and short responses, with Astra reserved for planning, ambiguous decisions or visual/computer-use steps that determine the trajectory. Set per-task token and attempt budgets. Record the full trace and evaluate the completed task, not the best intermediate message.
4. A simple cost example
Take one task that uses 10,000 input tokens and 2,000 output tokens per call, at OpenAI's standard short-context list rates. Each call is one attempt, and every call is billed:
- Sol: $0.02 for input plus $0.02 for output = $0.04 per call.
- Astra: $0.08 for input plus $0.08 for output = $0.16 per call.
If Sol succeeds on its second attempt, the task costs $0.08. If Astra succeeds on its first attempt, it costs $0.16. If Sol needs five attempts, it costs $0.20 — more than Astra's single successful call. The premium is therefore worth paying only when Astra avoids enough retries or editing to close that gap. The attempt counts are assumptions for illustration, not measurements; use your own logs.
That is the practical version of cost per accepted task: count every billed call, then weigh the dollar total against the time you spend making the result usable.
These figures are a planning estimate from OpenAI's published standard short-context prices, assuming input below 272,000 tokens per request. They exclude cache hits and cache writes, tool charges, batch, Fast, Ultrafast or background-window pricing (including discounts), regional uplifts, taxes, platform fees and human review or editing time. They are not a ToAPIs quote; check the model catalog and pricing page for the live rates on your account.
5. How to choose in three steps
- Start with Sol. Run the real task, or a small sample of it, through Sol with your production prompt and output rules. Record whether each result passes, how many calls it took, and how long you spent fixing it.
- Try Astra on the specific failures. If Sol fails for a reason a stronger model might fix — ambiguous instructions, weak design judgment, a difficult visual step — run the same inputs through Astra. Do not move the whole workload because one demo looked better.
- Compare total call cost and editing time. Add up every billed call at each model's per-call price, then put the time you spend reviewing or repairing output beside it. Choose Astra only when its extra call cost is covered by fewer retries, less editing or lower error cost.
For API integration, use the model catalog, pricing page and API documentation. For model IDs and a first request, see the companion GPT-6.2 API guide. Check the live catalog for the variants, rates and regions available to your account; this article does not assert platform-specific rates, endpoint paths or regional coverage.
6. Frequently asked questions
Is Astra worth 4x the price?
Only when the incremental quality changes the outcome enough to justify the premium. For routine, well-specified work, Sol is hard to beat. For high-value deliverables, expensive code changes or repeated Sol failures, Astra can be cheaper per task you can actually use despite the higher token rate.
Does Sol's lower price mean lower quality on coding?
OpenAI reports Sol within 0.5 points of Astra on FrontierCode 2.0 at about one-fifth the cost (both at max). That is a vendor claim, not a result for your repository. Test patch applicability, test pass rate, review effort and regression risk.
How should I account for cached input?
Cached input costs $0.40 per million for Astra versus $8.00 uncached; Sol is $0.10 versus $2.00. Cache writes are separate. If you reuse long prompts or documents, measure the cache-hit rate rather than assuming uncached pricing. The example assumes no cache benefit.
What about long prompts above 272K tokens?
Calculate separately. Above 272,000 input tokens, input and cache rates double and output is 1.5x the short-context rate for the full request. The 4:1 list-rate relationship remains, but absolute costs rise; keep long-context work out of short-context estimates.
Can I use ToAPIs to run this comparison?
The ToAPIs international catalog lists Astra and Sol, but this article does not assert platform-specific rates, endpoints or regional coverage. Check the live catalog and pricing page. The comparison harness in the developer appendix targets the official OpenAI API by default; if you use another OpenAI-compatible endpoint, confirm model IDs, fields and billing units.
7. Sources and method
- OpenAI: Introducing GPT-6.2 Astra and Sol, published November 17, 2026 — launch positioning, availability and vendor-reported results.
- OpenAI model page: GPT-6.2 Astra — model ID, context limits, modalities, tools and pricing, checked November 18, 2026.
- OpenAI model page: GPT-6.2 Sol — model ID, context limits, modalities, tools and pricing, checked November 18, 2026.
- OpenAI API pricing — standard, cache, long-context, batch, Fast and Ultrafast terms, checked November 18, 2026.
- ToAPIs: GPT-6.2 API guide — platform-specific setup and pricing; companion article.
Method note. The dollar figures are deterministic arithmetic from the published list rates and the token and attempt assumptions in the example. They are not invoices, quotes or measured results. No model inference, latency measurement, quality scoring or blind review was performed for this article, and the comparison harness in the developer appendix was not run. Replace the rates, token counts and attempt counts with your own pilot data before making a production decision.
Developer appendix: run your own comparison
The following protocol is designed to produce evidence for your own workload. It is deliberately not a leaderboard. The comparison was not executed for this article, and no model outputs or latency numbers are reported here.
Test design
- Freeze the task set. Use 20–50 representative cases, including easy cases that protect existing behavior and hard cases that distinguish the models. Remove confidential data, or replace it with synthetic equivalents.
- Freeze the request. Use the same system prompt, user input, tools, output schema and token budget for both models wherever the contracts allow it. Record unavoidable differences.
- Repeat nondeterministic tasks. Keep the distribution and the failures, not only the best output.
- Score blind. Remove the model label before review. A task passes only when it passes every required check; a polished answer that misses a field, invents an identifier or fails a test is a failure.
- Count billed attempts and separate latency. Failed attempts belong in the cost numerator when billed. Report time to first token, completion time and time to an accepted result separately, and state what the timer includes.
A minimal case set can look like this:
| Case | Task | Acceptance checks |
|---|---|---|
extract-01 | Extract item and quantity from a short order message | Valid JSON; exact keys; quantity is an integer; no invented values |
code-01 | Implement a function with boundary conditions | Patch applies; tests pass; invalid input rejected; no unrelated changes |
clarify-01 | Respond to an order-status request with no order ID | Asks for the ID; does not invent one; no write action |
memo-01 | Turn a supplied source pack into a one-page memo | Every required section present; figures traceable to the source; no unsupported claim |
The harness calls the official OpenAI Chat Completions endpoint with both model IDs, records usage, latency, requested/returned model identifiers and timestamps, and leaves accepted for a human reviewer. It requires an API key and only makes billable calls with --execute. estimate_cost ignores cache hits, billing-mode discounts and platform fees, so reconcile against billed usage. Do not use production data; do not assume an aggregator preserves model IDs or rates.
#!/usr/bin/env python3
"""Reusable GPT-6.2 Astra vs Sol comparison harness.
The comparison was not executed for the accompanying article. Requires OPENAI_API_KEY and
explicit --execute consent because calls are billable. Acceptance is manual.
"""
from __future__ import annotations
import argparse
import json
import os
import time
import urllib.request
from datetime import datetime, timezone
from pathlib import Path
API_URL = os.environ.get("OPENAI_BASE_URL", "https://api.openai.com/v1").rstrip("/") + "/chat/completions"
MODELS = ("gpt-6.2-astra", "gpt-6.2-sol")
RATES = {
"gpt-6.2-astra": {"input": 8.00, "output": 40.00},
"gpt-6.2-sol": {"input": 2.00, "output": 10.00},
}
CASES = [
{
"id": "extract-01",
"system": "Return only valid JSON with exactly the keys item and quantity.",
"user": "Please order 3 blue mugs.",
"rubric": ["valid JSON", "item is blue mugs", "quantity is the integer 3"],
},
{
"id": "code-01",
"system": "Return a unified diff only. Do not include commentary.",
"user": (
"Implement merge_intervals(intervals) so overlapping or adjacent "
"intervals are merged. Reject invalid ranges. Include tests."
),
"rubric": ["patch applies", "tests pass", "invalid ranges rejected"],
},
{
"id": "clarify-01",
"system": "You are an order-support agent. Never invent identifiers.",
"user": "Where is my order?",
"rubric": ["asks for order ID", "does not invent an ID", "no write action"],
},
]
def estimate_cost(model: str, prompt_tokens: int, completion_tokens: int) -> float:
rate = RATES[model]
return (
prompt_tokens * rate["input"] + completion_tokens * rate["output"]
) / 1_000_000
def call_model(model: str, case: dict) -> dict:
body = json.dumps(
{
"model": model,
"messages": [
{"role": "system", "content": case["system"]},
{"role": "user", "content": case["user"]},
],
"max_completion_tokens": 8000, # fixed cap for this comparison
}
).encode("utf-8")
request = urllib.request.Request(
API_URL,
data=body,
headers={
"Authorization": f"Bearer {os.environ['OPENAI_API_KEY']}",
"Content-Type": "application/json",
},
)
started = time.perf_counter()
with urllib.request.urlopen(request, timeout=180) as response:
payload = json.load(response)
elapsed = time.perf_counter() - started
usage = payload.get("usage", {})
prompt_tokens = usage.get("prompt_tokens", 0)
completion_tokens = usage.get("completion_tokens", 0)
return {
"requested_model": model,
"returned_model": payload.get("model"),
"api_url": API_URL,
"timestamp_utc": datetime.now(timezone.utc).isoformat(),
"case_id": case["id"],
"run": None,
"latency_seconds": round(elapsed, 3),
"prompt_tokens": prompt_tokens,
"completion_tokens": completion_tokens,
"cost_usd": round(estimate_cost(model, prompt_tokens, completion_tokens), 6),
"output": payload["choices"][0]["message"]["content"],
"rubric": case["rubric"],
"accepted": None,
"reviewer": None,
"review_notes": None,
}
def main() -> None:
parser = argparse.ArgumentParser()
parser.add_argument("--execute", action="store_true", help="make billable API calls")
parser.add_argument("--repeats", type=int, default=1)
parser.add_argument("--out", default="gpt-6-2-runs.jsonl")
args = parser.parse_args()
if not args.execute:
print("Dry plan only. Re-run with --execute after checking access, budget and data rules.")
for case in CASES:
print(json.dumps({"case": case["id"], "models": MODELS, "repeats": args.repeats}))
return
if not os.environ.get("OPENAI_API_KEY"):
raise SystemExit("Set OPENAI_API_KEY first.")
output = Path(args.out)
with output.open("a", encoding="utf-8") as handle:
for case in CASES:
for model in MODELS:
for run in range(args.repeats):
record = call_model(model, case)
record["run"] = run + 1
handle.write(json.dumps(record, ensure_ascii=False) + "\n")
print(json.dumps({
"case_id": record["case_id"],
"model": record["requested_model"],
"latency_seconds": record["latency_seconds"],
"cost_usd": record["cost_usd"],
}))
print(f"Wrote {output}. Fill 'accepted' manually against each rubric before comparing costs.")
if __name__ == "__main__":
main()
After review, compute the core number for the routing decision:
import json
from pathlib import Path
rows = [json.loads(line) for line in Path("gpt-6-2-runs.jsonl").read_text().splitlines()]
if not rows or any(type(row["accepted"]) is not bool for row in rows):
raise SystemExit("Review every row before comparing costs.")
for model in sorted({row["requested_model"] for row in rows}):
model_rows = [row for row in rows if row["requested_model"] == model]
accepted = sum(row["accepted"] is True for row in model_rows)
estimated = sum(row["cost_usd"] for row in model_rows)
per_accepted = estimated / accepted if accepted else None
print(model, {"accepted": accepted, "estimated_usd": round(estimated, 4),
"cost_per_accepted": round(per_accepted, 4) if per_accepted is not None else None})
The harness does not test tool execution, because running model-generated code or shell commands introduces security and reproducibility problems. If your workflow uses tools, evaluate the tool trace separately: valid arguments, authorization, side effects, retries and whether a clarification question was the correct action. A model that writes a perfect answer but calls a destructive tool incorrectly has not passed the task.







